5 Ways to Improve Your Pickup Truck and Its Performance

2014-f150-tremor

One common trait among many truck owners is that they are always looking for a way to improve their ride. Whether it be the truck’s performance – like wanting it to be able to tow more or go off-road – or just look better, there are plenty of ways to improve your truck, even if you just bought the brand new truck of the year. If you’re a truck owner looking for a couple of ways to spruce up your truck, here are a few suggestions to get you started.

Read the rest of this entry »

  

You can follow us on Twitter and Facebook for content updates. Also, sign up for our email list for weekly updates and check us out on Google+ as well.

Don’t Ignore Your Antifreeze!

dodge-14438_640

OK, you’ve seen the 50-50 rule haven’t you? It’s the rule of radiator coolant: you should always have a 50% mixture of antifreeze to distilled water in your radiator coolant tank. Bet you’ve wondered how important this is though. What happens if you have mostly water in your coolant? The answer is that electrolysis corrosion can occur.

Read the rest of this entry »

  

Car maintenance made easy with simple tips from “Top Gear USA” host Rutledge Wood

Everyone knows car maintenance is important, but if you’re not a gear head – someone who loves working on vehicles – the idea of doing routine car maintenance can be very intimidating.

Whether on the set of “Top Gear,” at NASCAR races or just in my garage at home, I’m fortunate enough to be around cars a lot. I love driving them, repairing them and tinkering with them. However, for a lot of people, cars can be a confusing and even intimidating piece of machinery to work on.

To help people feel more comfortable in maintaining their vehicles, here are some simple tips that can make anyone feel like a gear head.

Change your oil

While many don’t find the prospect of being under a car messing with greasy filters their idea of a fun Sunday afternoon, changing a car’s oil isn’t as daunting a task as it seems.

1. Make sure your engine is cool before you start, then safely jack up your car and support it with jack stands. Lay a piece of cardboard under the engine, just in case you spill any oil.

2. Position a recycling container under the oil pan that’s on the bottom of your engine, then undo the drain plug and let the old oil pour into it. When the old oil’s out, put the drain plug back on and tighten it to your car’s torque specification.

3. Next, remove your old oil filter using an oil filter wrench; turn the filter counterclockwise until it’s free, but watch out you don’t spill the old oil that’s still in it. Make sure the rubber gasket comes out with the old filter.

4. Then, taking your new oil filter, lubricate the rubber gasket with some new oil and fill the new oil filter with oil to about two-thirds full.

5. Carefully screw the new oil filter clockwise into place (holding it upright); tighten only as much as you can with one hand, don’t overdo it or else it can cause a leak.

6. Now it’s time to fill the engine with oil, so unscrew the oil fill cap on the topside of the engine and insert your funnel. It’s smart to check your owner’s manual to find out how much oil your engine holds if you’re unsure, then pour a little more than three-fourths that amount into the engine.

7. Finally, start your vehicle and let it run for about a minute. During that minute, take a peek underneath to make sure you don’t have any leaks. After a minute, turn off you vehicle and check the oil level on the dipstick, adding more if necessary.

I use and recommend Valvoline NextGen Oil. It works great, and since it’s made with 50 percent recycled oil, it’s good for the environment as well. To sweeten the deal, they’ve even come out with a Close the Loop program where they’ll give you a $20 mail-in offer if you return your used oil at participating auto parts stores and buy five quarts of NextGen for your next oil change.

Read the rest of this entry »